Remote control switch , multiple control methods.

★  Remote control switch style 

        ARCS remote control switches adhere to Full-2way system architecture, enabling direct communication and expansion with terminal devices. Multiple remote control switches can also be connected in parallel for mutual control, offering flexible on-site configuration. ARCS remote control switches boast several features, including:   

★  Remote control switch button control function

    1.Circuit switch control

        ◆ Toggle the on/off status of basic circuit switch, groups and scenario points.

        ◆ Remote control switch with one button for all ON/all OFF, allowing you to switch between states with a single click.

    2.Authorized circuit Switching Control 

        ◆ Control over the lock/unlock state switching for authorization locking of general circuit switch, groups, and scenario points. 

        ◆ Remote control switch with one button for all locking/all unlocking, allowing you to switch between states with a single click. 

    3.Enable Auto Timer Off 

        ◆ The circuit switch and authorization control, or the group point, will be automatically shut down by the system after the button is pressed, with a delay time of up to 18 hours. 

    4.Switch Authorization Control and Other Special Functions

        ◆ Control Set ON/ Set OFF state of circuit switch, groups, and scenario locations.

        ◆ Control Set Lock/ Set UnLock state of circuit switch, groups, and scenario locations.

 ★  遙控開關 LED指示燈狀態顯示

    1.Normal Signal Alert 

       ◆ ON：Red light

       ◆ OFF：Green light 

       ◆ Offline：none light

    2.Circuit lock operation light signal

       ◆ Circuit On Locked: When the  button is pressed, the red color blinks 3 times.

       ◆ Circuit On Locked: When the  button is pressed, the green color blinks 3 times.

    3.Dimming Mode Lamp Alert

       ◆ Loop into dimming mode: Press and hold the button for 3 seconds, the light flashes to enter the               loop dimming mode, you can press the up button and down button to adjust the brightness.

    4.Password Input Light Indicator 

       ◆ Password Entry Mode: Press any button and all buttons will flash red at the same time to start               entering the 5-digit password. If the password is correct, it will flash green three times (unlocked). If                                                                                                                     the password is incorrect, it will flash red three times (remain locked).